Care For Your Window Tint

Having your windows tinted is very necessary. Not only does it attract people but it also keeps the inside of your car or house at a low temperature and prevents ultraviolet sun-rays from penetrating through your windows. If you are spending money on high-quality tinting films,  it is important to ensure that you properly take good care of your window films in order to expand its lifespan.
Using the right window films, installation and care would make things easier for you. Your quality window tints wouldn’t end up fading, bubbling, and breaking down. To enjoy a longer period of time using your tinting films, you need to care for them on a daily basis.
You can enhance the lifespan and appearance of your window tinting films by doing the following care tips.

Proper Window Care Tips
Give it some time and wait for your window tints to cure:
Do not start cleaning your windows right away. Give it some days for your window tinting films to cure before cleaning. It usually takes 2-30 days depending on the weather of your region. However, if you are hiring a window tint installer for the job, then the specialist must have given a certain time frame for curing. Generally, every window tint films have their own cure requirements.

Immediately after the installation, do not roll down your windows. This can encroach on the curing process and cause the tint films to peel. Making sure not to roll down the windows in the first few days after getting your tint films installed can prevent damages.

Do the cleaning properly by using the right products:
When cleaning your tinted windows, try not to use any substance that contains ammonia. These type of harsh chemicals destroy the tint films over time and this must be avoided. You should not also use sharp or abrasive materials for cleaning because this can cause scratches on your tinted windows. Although these tinting films are designed with a scratch-resistant coating, that doesn’t mean it can be protected against sharp materials.

Here is a list of cleaning products that are safe to use:
Neat rubber squeegees
Soft cotton cloths
Microfiber Cloths
Cleaners that are specifically designed for cleaning window tints
Warm soapy water

Do not use products like:
– Sharp materials like razor blades or scrapers
– Cleaning products that contain ammonia and other harsh chemicals
– Vinegar
– Steel sponges and scrubbing pads
– Squeegees designed with sharp metal edges
– Baking soda

Brief Summary
Whenever you want to get your windows tinted, it is best to hire a window tint professional to do the task. After installation, try and wait for some days before cleaning in order to allow the curing process. Make use of proper cleaning products to clean your tinted windows and avoid using the bad ones. Try not to roll down your windows immediately after installing the tint films but rather wait for a few days. Do not use cleaning substances that contain ammonia or other harsh chemicals.
In the case of owning tinted cars, always be careful when loading and unloading luggage or fastening or unfastening your seatbelts. This is done to prevent small chips on the tinted windows due to careless movements.

What To Do If Your Car Needs To Be Towed?

Learn all you need to know about a car towing service before you even need it.

Be ready

You are stuck in a giant pothole or you have been involved in an accident. Which towing company will you call? You will feel more secure and calmer as you prepare in advance for an emergency. Look for the most reliable local towing service in advance. Keep this information on you. In an emergency, you will not have to choose at random. You will be fully prepared to handle the situation.

What to look for in a towing service?

At home or at work, you are probably in the vicinity of a trustworthy towing service. Search online to find one nearby. Choose the one that you think is trustworthy for a road emergency. Read past customer reviews to make sure you have chosen a reputable service.

To make sure that all the possible scenarios of vehicle breakdown or accidents are covered, some of the services and qualifications offered by a good towing service are listed below:

1.  Local and long-distance towing.

2.  Towing 24 hours.

3.  Flat towing besides the usual wheel lift.

4.  Heavy-duty tow truck to tow heavy cars, trucks or 4×4.

5.  Licensed, insured, affiliated with a reputable auto club;

6.  Keep regular contact.

Sign up for a car club. Most of these clubs have a roadside assistance program to assist their members with locating the best towing service nearby. In addition, you will enjoy discounts and benefits for members.

Check your auto insurance company’s policy coverage for towing in the event of a collision or breakdown. You can even find the contact details of a car towing service on your insurance card.

What can you expect from a towing operator?

You can expect a reputable car towing operator to comply with the regulations of the municipality in which they work. In fact, you will see a flat rate being charged for towing in some metropolitan areas with no additional charges for extra miles/km. A reliable towing service must assume the following basic responsibilities:

1.  Get you to sign a Towing Authorization Agreement.

2.  Submit an invoice before requesting payment.

3.  Take care of your vehicle and your personal belongings.

4.  Tow your vehicle to the garage of your choice.

5.  Follow your instructions when they are reasonable.

6.  Behave in a courteous manner.

How do you know if your car really needs to be towed?

In the event of a flat tire, if your car fails to remain stable, or if any fluid leaks from the bottom of the car after a collision, you must stop the vehicle immediately. Park aside and call a reputable company to ensure your safety and the safety of others on the road.

Do You Know The Different Types Of Tow Trucks?

Towing trucks are special vehicles used to tow stranded vehicles and take them to the nearest garage station or the location defined by the owner of the vehicle. There is no doubt that tow trucks are an efficient and reliable way of towing a broken vehicle to the destination safely. However, do you know there isn’t just one type of tow truck available with the towing companies, but they have a fleet of different towing trucks where each of those meant to serve the clients in a different way?

Service units

They can jump start vehicles, unlock the doors, deliver fuel during a breakdown, come to the rescue for a flat tire and other usual problems that occur in vehicles. However, there is one drawback to this type of truck, i.e., it can’t do towing.

The truck with wheel lift system

It has all the qualities of the service unit, and in addition to those, it can tow all sorts of vehicles whether 2WD or 4WD by raising the driving wheels, either at the front or at the back of the vehicle to tow.

The flatbed truck

Again, the flatbed truck is able to do everything the service unit offers. It can also do better than carrying the front or the back of a damaged vehicle. Indeed, it is stronger than the wheel lift because it can carry an entire car on its platform. A highly versatile unit, the flatbed truck can take from point A to point B all the vehicles that the wheel lift is able to carry, as well as very low-load and AWD models.

Although these tow trucks are strong and seem to be tough, there is no one on the market that has the equipment to carry a vehicle with all four wheels on the ground.

The curious case of ‘tow truck drivers’

Tow truck drivers are the “good guys” of the scenario when something goes wrong on the road.

However, when they have to move your car because it is on a lot or parking lot where you cannot park, the tow truck drivers become “the bad guys”.

  1. First, you need to be aware of the place where you have parked your car, as the owner of the place or car parking can call a towing company to tow your car any time. that’s his/her right.
  2. If the towing company that made the trip to the pound is refusing to reveal where your vehicle is, it may be an act of bad faith, or you may be intimidated.
  3. You can file a complaint with the Office of Consumer Protection or the police if the by-law has been violated.
  4. No towing company can hold your car.
  5. If you want a happy ending, always ask the person who towed your vehicle for a bill. And a word of advice: pay the bill later, not on the spot.
  6. The cost of towing and guarding vehicles can vary, depending on the weight of the car.

How to check tire pressure

Checking your tires on a regular basis can definitely help you improve your gas mileage and is an important part of regular vehicle maintenance.

Proper tire pressure of all 4 tires improves gas mileage because it handles the vehicle better. If you keep the tire pressure at its optimum level, it can help the vehicle flow better with air and travel much more easily. As a result, your gas mileage will improve as well. Also, keep in mind that the better the vehicle operates, the more driven it is. This will lower the risk of getting a flat tire, the tendency to slide.

Once the tire is down in the sky there will be a drawn tension on the vehicle which is another way to explain why fuel mileage will be affected. This pull will also affect the way the car operates. I know this is saying the exact same thing but the reason I say it in a slightly different way is to emphasize the importance of regularly checking your tire pressure. Consider that this little detail is even more important during the winter. The reason, of course, is the increased risk of snow or ice climbing during this time of year.

Checking your tire pressure can often help keep you safe on the road. This will reduce the wear of your tires. Driving relentlessly with low tire pressure can cause the belts in the tire to be torn or disturbed.

How long should your tire pressure be tested?
You should check it at least once a week. You should also check this before going on a long trip.

How do we check the tire pressure? This is the size of the tire on the side of the tire. You can also check your owner’s manual. It will also tell you what air pressure should be inside the tire. It should look something along the line of 35-PSI or 40-PSI. Remove the air cap from the valve stem. Take your pressure gauge and apply it to the valve stem. The tire pressure gauge indicates how much pressure the tire has. Make sure your tire reads the same as the PSI indicates. Also, make sure that all 4 tires have the same tire ventilation or PSI reading.

How do you inflate your tires to the appropriate PSI level? Here are 2 ways:

  1. If you have your own air compressor, you can attach the hose to the valve stem and fill the tire with air. Be sure not to overfill. Be sure to take your tire pressure gauge and check the level.
  2. If you don’t have your own air compressor, just look at the nearest gas station and search for ‘sky’. Again, make sure you have a tire pressure gauge with you so you can fill your tires with the correct PSI level.

How to jump-start a car

It’s a chilly morning and you’ve forgotten to plug in your block heater. Or maybe it’s a nice morning, but you left your lights on at night. Whatever the reason, the result is the same. A sick, half-hearted almost turnover when you turn the key on, or perhaps the sound of a click, or even dead silence. If the lights and radios do not turn on or fade when trying to drive, you must have a dead battery. Fortunately, there are jumper cables in your trunk and a willing friend or neighbor and most importantly know how to drive.

Start by parking the cars as much as possible without touching them. When you start the process of jumping, nobody is running. Fortunately, you just have to keep that in mind for the boosting car, as the car with the dead battery takes care of this step itself. Throughout the process, booster cables should never be allowed to touch themselves, the ground, and any damp or metallic ones. All of the interior lights, headlights, and radios should jump before you start driving. Most importantly, if the battery is frozen, cracked, leaked or otherwise damaged, do not try to encourage the car. The battery may explode.

Start by hooking booster cables in the live car, first the positive (red) cable clamp on the battery posts of the match, then the negative (black) cable. Then repeat the process to increase the car. It may be a good idea to attach a ground clamp (black, or negative flame) to anything other than a negative battery post, especially in warm weather. Everything you attach to it should be metallic, clean and unpainted. That way, when a dead car needs a burning spark to ignite, it won’t be near the battery, it may have steam burning on it.

Once the jumper cables are properly connected, try starting the car. In most cases, it will roar in favor of life. If it doesn’t, you can drop it off to charge a bit and try again or you can get a ride to the store to buy a new battery. If all fails, call a tow truck.